OPT
LENS TELECENTRIC
BARCODE READER
Moby Data
Digital Controller，MDPS series
Liên hệ
Characteristic
Digital Controller DPS series
Product features
◆ Small , light and flexible installing
◆ With strobe mode and constant light mode, can be switched according to demand
◆ External trigger adopts high speed optocoupler isolation design, provide accurate and high reliability trigger signal
◆ With power failure saving function
◆ With overload, short circuit protection
CST No.
Digital controller（DMT-MDPS Series）
| DMT No. | DMT-MDPS2475B-4TDP |
| Drive method | Constant Voltage |
| Light control mode | 256 degrees PWM controller |
| Panel button / RS232 | |
| Input voltage | DC12~24V |
| Channel | 4 |
| Output voltage | 12~24V（relative to voltage） |
| Max output current | 3.1A（Single channel max current 3A） |
| Total power | 75W |
| Output port | SMP-03V-BC（1: Output+ 2: NC 3: Output-） |
| External trigger interface | EDG3.81 |
| External voltage | DC5V~24V（current about 5.6mA） |
| External trigger delay | strobe mode：<8μs digital mode：＜25μs |
| Using temp/humidity | Temp：0~40℃、Humidity：20~85%RH（Non-condensation） |
| Storage temp/humidity | Temp：-20~60℃、Humidity：20~85%RH（Non-condensation） |
| Cooling method | Natural cooling |
Front Panel
External trigger port
| Port | Port definitions |
| COM | General port |
| CH1 | CH1 External trigger input |
| CH2 | CH2 External trigger input |
| CH3 | CH3 External trigger input |
| CH4 | CH4 External trigger input |
| COM | General port |
| GND | Controller power input- |
| DC12~24V | Controller power input+ |
Dimension(mm)
Sketch for Inner circuit of external trigger
Hãy là người đầu tiên nhận xét “Digital Controller，MDPS series”
Sản phẩm tương tự
Liên hệ
Đánh giá
Chưa có đánh giá nào.